USED MACHINERY - PARTIAL INVENTORY


PLEASE TELEPHONE 1-510-506-1752 OR EMAIL EDSCHLICK@PACIFICMACHINERYEXCHANGE.COM FOR DETAILS OR ADDITIONAL PHOTOGRAPHS
Be sure to visit our Ebay store at:
(additional photos are often available on Ebay)

IF YOU DON'T SEE WHAT YOU NEED LISTED, ED KNOWS WHERE IT IS OR HE CAN FIND IT FOR YOU.
CALL TODAY! 1-510-506-1752



MULTIPLE STARRETT GRANITE SURFACE PLATES

STILL IN CRATES, 21" X 27" X 3", ACCURATE TO .000150






$   200. EACH

PAY OFF REEL PACKAGE

American Pay-Off Reel, Model 60, 1,000 lb capacity, s/n: 5179               $2,250.

Rowe Model A10 Feeder/Straightener, Min thickness .020 - Max .105, Roll Width 12"

Rapid Air Feeder 6" 120 Volt, Single Phase




BOL-U-VAC VACUUM FORMER

48"X96", 240 VOLT, 3 PHASE, MAX AMP's160, WATTS 63KW, 1 YEAR OLD, LESS THAN 100 HOURS

EXCELLENT!



$17,500.

BRIDGEPORT STEP PULLEY MILL

2 AXIS DRO'S, 9" X 42" TABLE, CHROME WAYS, SERVO POWER FEED

ONE SHOT LUBE, COLLETS, 2" RISER, RUNS GREAT!

S/N: 249012



$ 2,250.




BRIDGEPORT 15" ROTARY TABLE

$ 350.

FORD BOX VAN                                                                 $ 8,950.

2003 FORD ECONO VAN, F-450 SUPER DUTY,101,000 MILES ON ODOMETER, VIN: 1FDXE45563HA44376, RUNS GOOD, VERY CLEAN

MILWAUKEE MODEL H HORIZONTAL MILL

2 EA OVER ARM SUPPORTS, 1 EA ARBOR, 1085 RPM HIGH, 35 RPM LOW, FEED 20" PER MINUTE, 1-3/4" PER MINUTE - LOW, S/N: 15-2930



$ 1,850.

NICHOLS-DeHOFF TWIN MILL                                                $ 3,950. 

MFG YR 1983, 10"X36" TABLE, TABLE TRAVEL : 20", 2 EACH CARBIDE SHELL MILL CUTTERS; APPROX 5" DIAMETER, 6" ANGLE LOCK VISE, S/N:TM83799  

VERY NICE!


OKUMA LB15 CNC LATHE                                          $ 5,500.

RS232 PORT, 8" CHUCK, 12 STATION TURRET, TOOLS & TOOLING, LIVE CENTERS, 50 EACH COLLETS 16C, S/N: 0208A04D

 


QUINCY ROTARY SCREW AIR COMPRESSOR

MFG YEAR 2000, 40 HP, 220/480 VOLTS, 3,000+ APPROXIMATE HOURS - LOW

$ 4,500.

TAYLOR-WINFIELD 30KVA SPOTWELDER                                               $2,150.

220 VOLT, PRESS TYPE, AIR OPERATED,10" IN GAP,6" THROAT, S/N: 68130

This machine can also be seen at:

http://www.ebay.com/itm/TAYLOR-WINFIELD-30KVA-SPOTWELDER-/222593223618?ssPageName=STRK:MESE:IT


Just cut and paste web address into your browser



UNION 5" 1986 HORIZONTAL BORING MILL
MODEL BFKE 130, SINUMERIK CONTROL, FULL 360 DEGREE ROTATION
X 77.8" UP AND DOWN
Y 31.5" LEFT TO RIGHT
Z 63" IN AND OUT
W 24" SPINDLE TRAVEL
SPINDLE SUPPORT, 2,000 RPM, 49" X 63" ROTARY TABLE

$ 79,500.

VERSON 4FT PRESS BRAKE

15 TON, 2" STROKE, SHUT HEIGHT 7-1/2", STROKE 2", FRONT OPERATED BACKGAUGE, S/H: 27018

$ 3,250.

TOO MANY IN OUR INVENTORY TO LIST HERE!

PHONE ED OR CHECK BACK DAILY - NEW ITEMS ADDED OFTEN!